Its two main qualities, which are its low weight and its great resistance. Its application can be seen on motorcycles, cars, modeling, bikes, etc. Advantage excellent resistance and lightness. Easy to print. Does not release harmful gases. Low thermal expansion. Chemical resistance. Drawbacks high printing temperatures. Nozzle wear. Things to consider when printing melting temperature between 230 and 265 ºc. No need for a warm bed it is necessary to use reinforced stainless steel nozzles from 0.4mm onwards. Tpu (thermoplastic elastomer) and tpe (thermoplastic polyurethane) - flexible filaments we end this post with flexible 3d printing filaments.
Both tpu and tpe are flexible and the difference between them is in the degree of hardness. The choice between one or the other will E Commerce Photo Editing depend on this characteristic, with tpu being firmer than tpe. It can be used for toys, mobile covers, decorative pieces, etc. Advantage soft and shock-absorbing materials. Recyclable. It can be moderately stretched and returns to its shape. Drawbacks low resistance to heat and chemicals. Absorbs moisture from the environment. They must be stored very well in vacuum bags with their corresponding silica bag. Its flexibility decreases over time and also if it is printed at temperatures higher than those recommended by the manufacturer. Things to consider when printing printing at speeds less than 30mm/s is recommended.
Printing temperature for tpe approximately 220 ºc and hot bed around 30 ºc. Printing temperature for tpu approximately 250 ºc and hot bed around 50 ºc. It is necessary to use nozzles of 0.4 mm and above.the architecture and engineering software company cype has developed a global collaboration platform called the bim server center . Know what it is? What is it for? Or how is it used? What is? Bim server center is an open technology social network or open bim.